China Best Sales Customized Sliding Bush Bushing Teflon Flat Gasket Washer Bearing of PTFE Electric Insulation bearing block

Product Description

PTFE PRECISION MACHINING OF CUSTOM PLASTIC COMPONENTS

PTFE (Polytetrafluoroethylene)is a performance thermoplastic known for its chemical inertness & resistance to attack, low coefficient of friction, broad operating temperature range, excellent dielectric properties, thermal & electrical insulating, negligible water absorption and non-stick characteristic and among many others
PTFE resins have an upper service temperature of 500º F (260 C) and is 1 of the most widely used fluoroplastic material. PTFE mechanical properties are low compared to other advanced engineering plastics, but its properties remain useful over a temperature range of -400° F to 400° F forming its broad operating range suitable for many applications. PTFE can be used as low as – 436º F (-260 C ).
PTFE properties are often enhanced using a variety of fillers creating a PTFE compound, such as a 15 or 25% glass filled PTFE, to improve wear resistance, increase part stability, and improves creep strength and reduce deformation under load in comparison with virgin grade PTFE. For electrical insulators, the addition of glass filler has little impact on electrical properties.
PTFE GASKETS come in all shapes and sizes,Gaskets are an integral component of any device which requires the confinement of a gas or liquid. They compensate for the unconformity of mating surfaces. These surface irregularities may be minute or large depending on the purpose of the device but in all cases, the gasket is required to compensate for the difference while limiting the flow of fluid in either direction. Gaskets differ from seals in that gaskets are normally cut from sheets or rolls while seals are formed individually in their own configuration. A flat cut gasket is derived from material of specific thickness and to a configuration that is designed for a specific application
Expanded PTFEEPTFE Gasket material is a soft and conformable material that is ideal for applications with limited bolt load torque available. Or in applications such as glass lined pipe where excessive bolt load will cause more problems than it will solve. If you have never touched this exceptional sealing material think of a dense marshmallow. It has the same chemical resistance and temperature range as any PTFE but it is soft and will effect a seal much quicker than regular PTFE gasket material

Characteristics

  • High and low temperature resistance(-180ºC~+260 ºC)
  • Corrosion resistance(strong acid, strong alkali etc)
  • Weather resistance
  • High insulation
  • High lubrication
  • Non adhesion
  • Non toxic etc

We manufactures made-to-order high performance, high quality engineered plastic components

  • PTFE Ball valve seats, piston rings, seals, lips, cups.
  • PTFE bearings, bushings, wear strips
  • Diaphragms, insulators, lantern rings, V-rings, gaskets, washers, balls
  • Custom PTFE labware including wafer dippers, containers & process vessels
  • Low quantity PTFE parts and assemblies for university & commercial research projects.
  • Molded PTFE – Basic Shape material: PTFE Rod, Blocks, Plates and Tubes
  • A variety of made-to-order OEM industrial components

INDUSTRIES & APPLICATIONS INCLUDE

  • General Industrial PTFE Components
  • Chemical Handling such as Valve Bodies, Seats & Seals, Balls and Pump Parts
  • Semiconductor Processing Industry including custom Labware and Tools
  • PTFE Containers, Funnels and Molds for Pharmaceutical & Biotech research
  • Parts for Food Processing Equipment (made from PTFE FDA approved for food contact)
  • Packaging Equipment
  • Compressor Parts
  • Electronics & Appliances
  • Textile Machinery
  • Office Equipment

Turning Centers/ Molding rings /MACHINING /TURNING

 

FAQ

1. Q: Are you trading company or manufacturer ?
A: We are manufacturer.

2. Q: How long is your delivery time?
A: According to the difficulty and quantity of product processing,It usually sent out 5-10days.

3. Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

4. Q: What are the after-sale services?
A: In case of quality problems, the package can be exchanged within 30 days.

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Material: PTFE
Density: 2.1-2.3
Tempture: -180 ~ +280 Degree
Hardness: 50~60
Tensile Strength: 15 MPa
Certificated: SGS
Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

sliding bearing

Role of Sliding Bearings in Vibration Dampening and Shock Absorption Applications

Sliding bearings are essential components in applications where vibration dampening and shock absorption are critical. Here’s how they fulfill this role:

Vibration Dampening:

In various industrial processes and equipment, vibrations can lead to reduced performance, increased wear and tear, and even structural damage. Sliding bearings help dampen vibrations by providing a cushioning effect between moving components. The design of sliding bearings allows them to absorb and dissipate vibrations, preventing them from propagating throughout the machinery.

Shock Absorption:

Heavy machinery and equipment often experience sudden impacts or shocks due to sudden loads or external forces. Sliding bearings with their ability to absorb shocks and impacts help protect machinery from damage. They act as buffers that absorb and distribute the energy generated by these shocks, preventing it from causing harm to other components or the machinery structure.

Isolation of Vibrations:

Sliding bearings can be strategically placed in machinery to isolate specific components or sections from vibrations. This isolation helps maintain the stability and accuracy of delicate components that might be sensitive to vibrations, such as precision instruments or measurement devices.

Enhanced Comfort:

In applications involving human interaction, such as vehicles or industrial tools, sliding bearings contribute to user comfort. By reducing vibrations and shocks transmitted to the operator or occupants, sliding bearings improve the overall user experience and reduce operator fatigue.

Prevention of Resonance:

Resonance is a phenomenon where vibrations can be amplified due to the natural frequencies of the components. Sliding bearings help prevent resonance by providing damping properties that counteract the amplification effect. This is crucial in applications where precise control and stability are required.

In conclusion, sliding bearings play a vital role in applications requiring vibration dampening and shock absorption. Their ability to dampen vibrations, absorb shocks, isolate vibrations, enhance comfort, and prevent resonance contributes to the efficient and reliable operation of machinery and equipment in various industries.

sliding bearing

Benefits of Sliding Bearings in Low-Speed and Heavy-Load Applications

Sliding bearings offer significant advantages in low-speed and heavy-load applications, where their unique characteristics provide optimal performance. Some examples of scenarios where sliding bearings benefit such applications include:

  • Mining Equipment: Sliding bearings are used in mining machinery such as crushers, mills, and conveyor systems. These applications often involve heavy loads and low speeds, where sliding bearings can provide robust support and reliable operation.
  • Steel Mills: In steel production, sliding bearings are utilized in rolling mills and continuous casting machines. These operations require handling heavy loads and slow rotation speeds, making sliding bearings suitable for providing the necessary support.
  • Hydraulic Systems: Sliding bearings are used in hydraulic cylinders, where slow and controlled movements are required for applications like construction machinery, material handling equipment, and heavy-duty presses.
  • Cranes and Lifts: Sliding bearings are employed in the construction of cranes, elevators, and lifting platforms. These applications involve lifting and lowering heavy loads at controlled speeds, making sliding bearings crucial for smooth and reliable motion.
  • Wind Turbines: Sliding bearings are used in the yaw and pitch systems of wind turbines. These systems need to handle the substantial weight of the turbine blades and operate at low speeds to optimize energy generation.

In these scenarios and more, sliding bearings provide the necessary support, stability, and durability required for low-speed and heavy-load applications.

sliding bearing

Impact of Proper Lubrication on Sliding Bearings

Proper lubrication plays a critical role in the performance and longevity of sliding bearings. Here’s how it affects their operation:

  • Reduced Friction and Wear: Lubrication forms a thin film between the sliding surfaces of the bearing, reducing direct metal-to-metal contact. This minimizes friction and wear, which can significantly extend the bearing’s lifespan.
  • Heat Dissipation: Lubricants help dissipate heat generated during operation by carrying away excess heat from the friction zones. This prevents overheating and potential damage to the bearing and surrounding components.
  • Corrosion Prevention: Lubricants provide a protective barrier against moisture and corrosive substances, preventing the formation of rust and corrosion on the bearing surfaces.
  • Sealing Effect: Proper lubrication can help create a sealing effect that prevents contaminants from entering the bearing, maintaining a clean and efficient operating environment.
  • Noise and Vibration Reduction: Adequate lubrication helps dampen noise and reduce vibration caused by friction between bearing surfaces. This contributes to quieter and smoother operation.
  • Enhanced Load Distribution: Lubrication ensures even load distribution across the bearing surfaces, preventing localized wear and extending the bearing’s overall life.
  • Stability and Performance: Proper lubrication maintains consistent performance and stability by minimizing variations in friction and reducing the risk of sudden failures.
  • Seizure Prevention: Lubricants prevent sliding surfaces from seizing or sticking together, even during periods of prolonged inactivity.
  • Optimized Efficiency: Well-lubricated bearings experience less energy loss due to friction, resulting in improved overall efficiency of the machinery.

Choosing the right lubricant type, viscosity, and lubrication interval is crucial to ensuring the optimal performance and durability of sliding bearings. Regular maintenance and monitoring of lubrication levels are essential to prevent issues and extend the bearing’s service life.

China Best Sales Customized Sliding Bush Bushing Teflon Flat Gasket Washer Bearing of PTFE Electric Insulation   bearing blockChina Best Sales Customized Sliding Bush Bushing Teflon Flat Gasket Washer Bearing of PTFE Electric Insulation   bearing block
editor by CX 2024-05-10